Assessment Day

In our Machine Shop subject we had our first assessment on the different measuring materials like the micrometer, hand rule, vernier caliper, inside and outside caliper. The arrangment of the assessment is one by one called by Sir Cabatan. This assessment is judge by the accuracy of the cadet to get the measurement of the object, the measurement can be .10 difference to the real measurement of the object.

The Dial Indicator

We tackled about the Dial Indicator in our Machine Shop with our teacher first engineer Cabatan replacing his former classmate Sir Bong Sanchez. These dial indicators are instruments used to accurately measure a small distance. They may also be known as a Dial gauge, Dial Test Indicator (DTI), or as a "clock". They are named so because the measurement results are displayed in a magnified way by means of a dial.
Dial indicators may be used to check the variation in tolerance during the inspection process of a machined part, measure the deflection of a beam or ring under laboratory conditions, as well as many other situations where a small measurement needs to be registered or indicated. The definition of small depends on the observer however a range between 1 mm (0.040") and 50 mm (2") may be thought of as typical with a travel of 10 mm (approx 0.5") being perhaps the most common.

My BSN Gonzales's Lifeboat

This week on NTMA we had our ride on the Lifeboat. Here in NTMA I always imagine what does it feels like to board that thing above the swimming pool. But this week we made that imagination a reality. We board the lifeboat last week with the supervision of our beloved BSN Gonzales. We conducted the onboard experience per group; we have ten cadets each group that consist of a sub leader namely, me on the forward, a leader, six cadets on each side of the lifeboat for the rowing and two for the tying of the painter or called rope to the bollard. The one who is controlling rudder is sir BSN Gonzales. The one that has the hardest part in giving commands is the leader because he has to know all of the commands like oars, rest on oars, up oars etc. I enjoyed this experience because this is the first time I have ride a lifeboat and it was very exciting to have as a memory.

The Honest Changes for the future

Blog # 6

This second and last semester of our first year I am going to set myself into studying rather than using my free time in sleeping. I will also make my homework. I will also finish all my project earlier because in the last sem. I am having a hard time in the other projects. I will also follow the rules and the regulations of the academy.